News - Know more about the badminton racket string !

Choosing a good stringing machine and the quality of the pull line is very important, it is related to the line situation, the stability of the ball and the rebound of the force. If the quality of the cable is poor, it is easy to lose the weight and the cable is worn out. In severe cases, the racket may be deformed due to uneven force. Therefore, we must understand the knowledge of the cable.

Stringing machine for Badminton

Here is a summary of common cable pull knowledge for your reference.

1. Pulling method:

Four knots and two knots:

(1) Four knot method Yonex threading method. It is divided into two lines, separated horizontally and vertically, and has four knots. The four-knot method unifies the number of pounds that the horizontal line is 10% higher than the vertical line, and is generally 2 pounds higher.

The four-knot method of threading can make the thread bed more evenly stressed, but it is easy to lose pounds.

top stringing machine

(2) Two-section method

The whole process is completed with one thread, so there are only two knots, so it is called two knots. Generally speaking, the horizontal line is 2 points higher than the vertical line.

The two-knot method of threading can guarantee the weight, but the thread bed is prone to uneven force, which is not conducive to control.

computer stringing machine

2. Aerial photography on the machine When pulling the thread, it is necessary to thread and pull one on the machine. If the stringer puts the string underneath in advance, and then pulls it on the machine, he must be stopped, because this method is easy to cause uneven force on the racket, and the back and forth pull string will damage the skin of the ball line.

3.Don’t wax If the threader waxes you and says that waxing is good, you must not believe him! ! ! Waxing is good for him to thread, not good for us players.

The waxed ball line is particularly slippery, it is easy to line, causing instability of hitting the ball.

Table stringing machine

4. Check after pulling the thread

After pulling the line, check whether there is any wrong line; whether the nails and the wire protection tube are damaged; whether the frame is pulled or collapsed.

Tap your palm with the thread bed and feel whether the weight of the thread is in line with yourself.

manual type stringing machine

5. Cut the wire immediately

If there is a broken line on the court, you should cut off the horizontal and vertical lines immediately, so that the frame can maintain a balance of forces and prevent it from collapsing. When cutting the thread, start from the middle, go up and down, left and right. This action should be as fast as possible.

If the weather is too cold, you should rub the line bed with your hands more before going to play, and give the line bed a certain temperature, so as not to be too cold and cause the ball to break.

stand stringing machine

 

Sibosi stringing machine is on sale, if interested in buying,please contact :

+86-13662987261(WhatsApp & WeChat Available)

 


Post time: Jun-17-2021